Defined shelf-reading conditions
The specified detection performance applies when books are at least 8 mm thick and the tag-overlap area between adjacent books does not exceed 50%.
RTX1002 RFID Antenna
13.56 MHz HF smart-shelf antenna | ISO 15693
A metal-shelf-compatible antenna for controlled book and item inventory zones
Up to 50 books per shelf layer in 1.2 seconds
With 50 books placed on one shelf layer, the detection time is no greater than 1.2 seconds. Actual performance should be verified with the selected books, tags and shelf construction.
Metal-shelf-compatible 13.56 MHz design
Supports ISO 15693, reader RF power up to 4 W and installation on metal shelving.
210 x 16 x 255 mm ABS antenna body
An MCX antenna connection and TCP/IP communication support integration into the smart-shelf system.
Technical specifications
RTX1002 RFID Antenna
HF smart-shelf performance
| Frequency | 13.56 MHz |
|---|---|
| Protocol | ISO 15693 |
| Supported RF power | 4 W or below |
| Detection rate under specified conditions | Near-complete detection in the documented test setup |
| Layer detection time | No more than 1.2 seconds for 50 books |
| Book and tag conditions | Book thickness ≥8 mm; adjacent tag-overlap area ≤50% |
| Metal shelf support | Supported |
Interface and structure
| Connection | MCX |
|---|---|
| Communication | TCP/IP |
| Dimensions | 210 x 16 x 255 mm |
| Material | ABS |
Technical specifications
RTX1002 RFID Antenna
Test conditions and project validation
| Validation note | The documented test setup recorded near-complete detection with book thickness ≥8 mm and adjacent tag overlap ≤50%. Validate project performance with the selected tag specification, shelf material and site installation conditions. |
|---|
Dimensions and structure
RTX1002 RFID Antenna
Project configuration, certification and final specifications are subject to the confirmed quotation and technical agreement.