RU5323-Y UHF Reader

Battery-powered UHF industrial reader head | Ethernet, WiFi, RS485 and external antennas

A multi-interface reader head for temporary or infrastructure-light industrial read points

11,800 mAh internal battery

The corrected product file records up to 48 hours of continuous operation and 96 hours of standby; actual endurance depends on RF duty cycle, networking and environment.

Ethernet, dual-band WiFi and RS485

Industrial Ethernet, 2.4/5 GHz WiFi and RS485 support mobile, temporary and fixed integration patterns.

Three external SMA antenna ports

Three SMA interfaces allow the read zone to be shaped with project-specific external antennas in addition to the integrated reader architecture.

Battery, DC and PoE power modes

The unit can operate from its internal 12 V battery, 10-30 V DC or 46-54 V PoE, supporting deployment where permanent power is limited.

Technical specifications

RU5323-Y UHF Reader

UHF RFID performance

Frequency	860-960 MHz, configurable for the regional range
Protocol	ISO 18000-6C / EPC Class 1 Gen 2
Reference read range	0-5 m; depends on tag size, antenna and environment
External antennas	Three SMA interfaces

Communication and power

Communication	Industrial Ethernet, 2.4/5 GHz WiFi and RS485
Communication rate	Ethernet 10/100 Mbps; RS485 9,600-115,200 bit/s
Power	12 V internal battery, 10-30 V DC or 46-54 V PoE
Battery	11,800 mAh
Reference endurance	Up to 48 hours continuous operation and 96 hours standby in the documented configuration
Maximum current	Less than 0.72 A at 12 V DC

Technical specifications

RU5323-Y UHF Reader

Physical and environmental

Dimensions	234 x 190 x 60 mm; top cover 130 x 130 mm
Weight	1,040 g
Mounting	Two M8 nuts
Housing	ABS top cover and metal bottom shell
Ingress protection	IP65
Operating temperature	-30°C to +65°C
Source note	The older DOCX heading is inconsistent; this manual follows the latest corrected RU5323-Y product file