ISO 15693 HF identification
The 13.56 MHz reader supports ISO 15693 and provides 0.25-1.5 W adjustable RF output for HF inventory and inspection workflows.
RX-1001H Handheld Terminal
13.56 MHz HF handheld inspector | ISO 15693 and long-reach form factor
HF inventory, search and inspection for shelves, archives and item-level assets
Up to 40 cm reference read range
Under reference test conditions, read range reaches up to 40 cm with an inventory rate of up to 70 tags/s; actual performance depends on the tag, orientation and site conditions.
On-device display and local records
A 1.44-inch color display shows inventory counts and operating status, while non-volatile storage retains up to 80,000 tag records.
WiFi, Bluetooth and USB connectivity
WiFi, Bluetooth BR/EDR and Micro USB 2.0 support host-controlled and mobile workflows; the replaceable 3,350 mAh battery supports more than three hours of continuous scanning under the documented condition.
Technical specifications
RX-1001H Handheld Terminal
HF RFID performance
| Frequency | 13.56 MHz |
|---|---|
| Protocol | ISO 15693 |
| RF output | 0.25-1.5 W adjustable |
| Reference read range | Up to 40 cm; depends on tag performance, orientation and environment |
| Reference read rate | Up to 70 tags/s under documented test conditions |
| RF protection | Idle RF shutdown, temperature sensing and automatic over-temperature protection |
Technical specifications
RX-1001H Handheld Terminal
Display, controls and storage
| Display | 1.44-inch 65K-color TFT LCD, 128 x 128 |
|---|---|
| Controls | Three multifunction keys: power/confirm, scan/up and clear/down |
| Status feedback | Red RFID activity LED and integrated buzzer |
| Local storage | Non-volatile storage for up to 80,000 tag records |
| Operating modes | Host control, active scan, anti-theft, search and library modes |
| Firmware | Remote firmware upgrade supported |
Connectivity
| Bluetooth | BR/EDR, integrated antenna, 2.4-2.48 GHz ISM band |
|---|---|
| WiFi | IEEE 802.11 b/g/n, integrated antenna, 2.412-2.484 GHz |
| Wired interface | Micro USB 2.0 |
Technical specifications
RX-1001H Handheld Terminal
Physical and electrical
| Battery | One replaceable 3.7 V, 3,350 mAh NCR18650B lithium-ion battery |
|---|---|
| Reference endurance | More than 3 hours in continuous scanning mode under the documented condition |
| Power consumption | Less than 5 W |
| Dimensions | 570 x 113 x 41 mm |
| Weight | 355 g |
| Specification note | Final range, endurance and configuration depend on the selected tags and confirmed project setup |